20© Panasonic Electric Works SUNX Co., Ltd. 2011 MJE-SFBHC No.0024-49VFunctional DescriptionsThis deviceSF4B / SF4B seriesSF-C14EXCopiedSF4B / SF4B seriesSF-C14EXCopiedSF4B / SF4B seriesSF-C14EXOriginalUpload Download(Storage area for SF-C14EX)3-2-4 Emission Intensity Control FunctionThis function reduces the emitting intensity.It is useful for preventing interference from the emitter to the other devices.Emission intensity control_ CLR (Ineffective) : Operating range is 0.3 to 9m for SF4B-H
SF4B-H (12 to 64 beamchannels) and SF4B-A
SF4B-A (6 to 32 beam channels), 0.3 to7m for SF4B-F
SF4B-F and SF4B-H
SF4B-H (72 to 96beam channels) and SF4B-A
SF4B-A (36 to 48 beam channels)(factory setting)._ SET (Effective) : The operating range is reduced by approx. 50%.3-2-5 Copy FunctionThis is a function to copy the setting of a SF4B / SF4B series to other SF4B / SF4B seriesand SF-C14EX.~ " % $ % $& { $ + $-ber of beam channels, same model No.).All functions that are settable with this device can be copied.Note that the password is also copied with this function.The following operations are available with this function. Upload : Upload the functional setting data of SF4B / SF4B series or SF-C14EX to thisdevice. Download : Download the functional setting data of this device to SF4B / SF4B series orSF-C14EX. Monitoring : Check the functional setting data saved in this device.3-2-6 Muting Setting Changing FunctionThe setting of the muting function can be changed.Setting of the muting function on each beam channel Each beam channel can be set to “effective / ineffective” in the muting function respectively. (Note) The factory setting of this function is effective for all beam channels.Note: If the beam channel set to ineffective in the muting function is blocked, the safety output 1 / 2 of SF-C14EX becomes “OFF”and the muting function is canceled. There are two setting methods, “Auto” and “Manual” to set muting beam channel._ Auto setting : The beam channel which is currently blocked is set as the “effective” beamchannel. When all beam channels are in light receiving condition, the setting isnot accepted. Furthermore, in the state where emission is halted or all beamchannels are blocked, the all beam channels become “effective” in the mutingfunction._ Manual setting : Each beam channel can be set to “effective / ineffective” in the muting function.ON: The muting function is effectiveOFF: The muting function is ineffective
