Panasonic SFB-HC Instruction Manual

Also see for SFB-HC: Instruction manual

22© Panasonic Electric Works SUNX Co., Ltd. 2011 MJE-SFBHC No.0024-49VFunctional Descriptions3-2-10 Initialization FunctionThe settings can be initialized. (factory setting) (Note 1)The factory setting of each function is as follows.Function SettingFixed blanking function IneffectiveFloating blanking function IneffectiveAuxiliary output switching function Mode 0Emission intensity control function Normal modeMuting settingchanging func-tionSetting of the muting function on each beam channel Effective for all beam channelsMuting input conditions A = BSetting of the muting lamp diagnosis function (Ver. 2 or later) EffectiveMuting sensor output operation setting (Ver. 2.1 only) (Note 2) -Interlock setting changing function (Note 2) -External devise monitor setting changing function (Note 2) -Override setting changing function (Ver. 2.1 only) (Note 2) -Notes: 1) The setting of the protective function and the setting data of the copy function are not initialized.2) This function cannot be set when SF-C14EX is used.3-2-11 Setting Contents Monitoring FunctionEach setting of the SF-C14EX series can be monitored. The following can be monitored. Model No. / the number of beam channels & * & { & $ Y & = & & { & $ Y Setting of the auxiliary output switching function Setting of the emission intensity control function Setting of the muting setting changing function(Reading out the record of the latest 5 times is possible, however, only for setting beam channel.)3-2-12 Override Setting Changing Function (Ver. 2.1 only)This function cannot be set when SF-C14EX is used.