22VOL +- MODE/VOLAdvanced FunctionsBacklight Compensation FunctionThis prevents a recording subject from being recorded too dark inbacklight. (Backlight is the light that shines from behind a recordingsubject.)1 Set the Operation Mode to [REC>>MPEG4] or[REC>>PICTURE] 1.2 Move the Jog Lever up for about 1 second.≥The [ª] Indication 2 is displayed.To Resume Normal RecordingMove the Jog Lever up for about 1 second.≥When the Backlight Compensation Function is activated, the entirescreen becomes brighter.≥Turning the power OFF will release this function.≥It is not possible to use Horizontal Stripes Reduction Mode when thismode is set to ON.≥The backlight may not be sufficiently compensated for in dark places.≥The Backlight Compensation Function cannot be set or released whilerecording.Adjusting White BalanceThe SD Multi AV Device adjusts White Balance automatically. However,depending on the scene or light condition, the Automatic White Balancemay not be able to bring out natural colors. In such cases, the whitebalance can be adjusted manually.1 Set the Operation Mode to [REC>>MPEG4] or[REC>>PICTURE] 1.2 Point the SD Multi AV Device at a full-screen whitesubject (e.g. white paper).3 Keep pressing the center of the Jog Lever 3 until the[1] Indication 2 is displayed.To Resume Automatic AdjustmentPress down the center of the Jog Lever until the [1] Indication 2disappears.≥You may not be able to achieve correct White Balance adjustmentmanually under weak illumination. (In this case, the [1] Indicationflashes.)≥Turning the power OFF will release the adjusted White Balance setting.≥This mode cannot be set or released while recording.≥Adjustment of White Balance is effective under the followingconditions.-When recording under reddish lighting (halogen light bulb,incandescent light bulb, etc.).-When recording a picture of mono-tone color.-When recording under multiple light sources.VOL +- MODE/VOL1,21MPEG4PICTUREVOICEPUSH/SETSELECTRECPLAY121,311MPEG4PICTUREVOICEPUSH/SETSELECTRECPLAY123