Panasonic SV-AV10 Operating Instructions Manual

Contents

Panasonic SV-AV10 Operating Instructions Manual Manual pdf 26 page image

26CARD EDITINGPRESS MENU TO RETURNERASE ALL FILESYESFILE PROTECTIONYESDPOF SETTING YESSLIDE SHOW YESCARD FORMAT YESMPEG4PICTUREVOICEMUSICRECPLAYPUSH/SETSELECTPlaying back still pictures one by one (SlideShow)The recorded still picture in the Card can be played back like a SlideShow.1 Set the Operation Mode to [PLAY>>PICTURE] 1.2 Set the [SLIDE SHOW] on the [CARD EDITING] 2 Menuto [YES].≥Slide show starts from the selected still picture.≥All pictures are sequentially displayed, each for about 5 seconds,and the show stops at the last picture.ª To cancel the Slide ShowPress down the center of the Jog Lever 3 for about 2seconds.≥Press down the center of the Jog Lever once, and the playback willpause.≥Playback time may take longer than usual depending on the picture.≥The order and playback time of a slide show set on another device isnot applicable to this SD Multi AV Device (all pictures are played back).Formatting the CardIf a Card becomes unreadable by the SD Multi AV Device, formatting itmay make it reusable. Formatting erases all the data recorded on aCard. If additional cards are purchased it is advisable to format the cardbefore it is used for the first time.1 Set the Operation Mode to [PLAY>>MPEG4],[PLAY>>PICTURE], or [PLAY>>VOICE].2 Set the [CARD FORMAT] on the [CARD EDITING] Menu1 to [YES].≥A verification message appears 2.3 Move the Jog Lever up or down to select [YES] andpress down the center of the Jog Lever 3≥Formatting is carried out.≥By formatting, all data stored in the Card (e.g., still pictures, MPEG4moving pictures, voice data, music data) is erased.≥Format the Card on the SD Multi AV Device or on Panasonic MediaManager (supplied). A card formatted on a machine other than the SDMulti AV Device may not be used. A card formatted on the SD Multi AVDevice may not be used on other machines. Format a card on themachine on which it is used.≥If the write protection switch of the SD Memory Card is set to [LOCK],data cannot be erased.≥When the Card is formatted, the files will be deleted, even if files arelocked.≥As formatting erases all the data, save the necessary data on apersonal computer, etc. beforehand.≥Format may take a little time. Wait until the ACCESS Lamp goes out.(The message [PLEASE WAIT] will be displayed.)12CARD EDITINGPRESS MENU TO RETURNERASE ALL FILESYESFILE PROTECTIONYESDPOF SETTING YESSLIDE SHOW YESCARD FORMAT YESFORMAT WILL ERASEALL FILESNo RETURNYES12VOL +- /MENUMODE/VOL211,23VOL +- /MENUMODE/VOL211,2,33