Panasonic SV-AV10 Operating Instructions Manual

Contents

Panasonic SV-AV10 Operating Instructions Manual Manual pdf 8 page image

8Turning the Power ON1 Install the battery or plug in the AC adaptor. (l 6)2 Hold down the [ ] button for about two seconds.≥The SD Multi AV Device is turned on.≥The message [PLEASE WAIT] is displayed for a while and then themode selection screen will be displayed.≥If the device is not used for 10 minutes or longer , the power isautomatically turned off. Press the [ ] button again to turn itback on.ª Turning the Power OFFWhile the Power is on, hold down the [ ] button for about twoseconds.Selecting Operation ModesSelect a desired mode on the mode selection screen.1 Press the [MODE] Button.≥The mode selection screen 1 appears.≥The mode selection screen also appears when the power isturned on.2 Press the [MODE] Button to select [REC] or [PLAY].≥Toggles back and forth between [REC] and [PLAY] by a push.3 Move the Jog Lever up or down to select a desiredmode.4 Press down the center of the Jog Lever 2.≥The mode selection screen disappears, and the selected mode isnow set.ª About the Operation ModesSeven operation modes are provided as follows.≥Moving picture (MPEG4 format) record mode [REC>>MPEG4]≥Moving picture (MPEG4 format) play mode [PLAY>>MPEG4]≥Still picture (JPEG format still picture) record mode [REC>>PICTURE]≥Still picture (JPEG format still picture) play mode [PLAY>>PICTURE]≥Sound (VOICE format) record mode [REC>>VOICE]≥Sound (VOICE format) play mode [PLAY>>VOICE]≥Music (MPEG2-AAC music/ MP3 format) play mode [PLAY>>MUSIC]/MENU2MODE/VOLVOL +-RECPLAYPUSH/SETSELECTMPEG4PICTUREVOICE11,23,42