29Installing SD-MovieStage (Cont.)6 Click the [YES] Button.≥The necessary software for the SD-MovieStage is installed.7 Click [Yes] Button to create the short-cut icon on thedesktop.8 At the end of the Setup, click on the [Finish] Button.≥After rebooting the computer, the SD MovieStage is enabled.≥For operating instructions, please read the PDF manual on the CD-ROM. To read the PDF Manual, you must have Adobe® Acrobat®Reader™ 5.0 or higher. If Adobe® Acrobat® Reader™ is notinstalled on the Personal Computer, please install it from the CD-ROM.ª Cautions for Windows XP/2000 ProfessionalWhen installing or using this software, specify the user name to[Administrator (computer administrator)] or any other user name havingthe equivalent right. Then log on with that user name to install thissoftware.(If you do not have such a right, consult with your system administrator).Connecting an SD Memory CardFor the detailed operation of the USB Reader/Writer, refer to theadditional instructions supplied in the same package.1 Turn on the computer and start Windows.2 Connect the USB Reader/Writer to the computer’s USBport.≥The driver for the USB Reader/Writer is enabled automatically.≥If you use Windows 98SE, install Panasonic Media Manager(supplied accessory) before using the SD-MovieStage.3 Taking care that the card is facing the right way, insertthe SD memory card into the USB Reader/Writer.≥Insert label-up with the cut-off corner facing in.Starting SD-MovieStageThe step below starts the SD-MovieStage. Please read the PDF-basedInstructions for using the SD-MovieStage.1 Select [Programs] >> [Panasonic] >> [SD-MovieStage]>> [SD-MovieStage] from the Windows start menu.≥SD-MovieStage will start.78623