Panasonic WJ-HD200 Operating Instructions Manual

Also see for WJHD200 - Digital Disk Recorder: Operating instructions

Contents

Panasonic WJ-HD200 Operating Instructions Manual Manual pdf 28 page image

28 Manual Recording Setup (RECSETUP)The WJ-HD200 will record image and audio data either withor without timer restrictions. Manual recording is availablewhen OFF is selected for TIMER in WJ-HD200 MAIN MENU;the timer schedule does not apply. Alarm recording willalso be carried out with parameters specified in this menu.Refer to Recording Mode Setup PROG1-4 SETUP, NO. 1-4 for operating procedures and available parameters. Externally Specified RecordingMode (EXT REC SETUP)This setting allows changing the recording mode from theongoing one to an optional one specified here when turningon the switch connected externally to the EXT REC terminal.1. Move the cursor to EXT REC MODE with the [D] or [C]button.2. Select the desired mode with the JogDial, and pressthe JogDial.Refer to page 26 and 27 for the recording mode para-meters.3. Press the [SETUP/ESC] button to return to WJ-HD200MAIN MENU. Display Setup (DISPLAY SETUP)You can program the display of information on the monitor,such as clock, time and date, and so forth. Clock (CLOCK)1. Press the JogDial (SET) to move the cursor to thedesired position.2. Rotate the JogDial clockwise to increase the parameter,or counter-clockwise to decrease. The positions indi-cate the year, month, day, hour, and minute respective-ly.The default is "JAN 01. 03 00:00".MM DD YY HH : MM3. Press the JogDial (SET) to validate the selection.4. Press the [D] or [C] button to select the next item, orpress the [SETUP/ESC] button to quit the display setup. Time & Date (TIME&DATE)1. Select a display type with the JogDial.The default is TYPE1 24H.TYPE1 24H: Time and date are displayed in one line inthe 24-hour system.TYPE1 12H: Time and date are displayed in one line inthe AM-PM system.TYPE2 24H: Time and date are displayed in two lines inthe 24-hour system.TYPE2 12H: Time and date are displayed in two lines inthe AM-PM system.DISPLAY SETUPCLOCK→ JUN30.03 15:05TIME&DATE TYPE1 24HTIME&DATE DISP.ONTIME&DATE POSI.R-LOWERSTATUS DISP. ONSTATUS POSI. R-LOWERHDD FULL 1%REMOTE LED ONHDD CHECK 0:00CAMERA TITLEOJUN30.03 20:00:00JUN30.0320:00:00TYPE1TYPE2WJ-HD200 MAIN MENUTIMER OFFOREC SETUPOEXT REC SETUPODISPLAY SETUPOSYSTEM SETUPOALARM SETUPOCOMMUNICATION SETUPOSWITCHER SETUPOSYSTEM INFORMATIONO