57 To Access Setup MenusThere are fourteen setup menus to adapt the WJ-HD200 toyour requirements.1. On the Main Control Panel, click the [SETUP MENU]button. The setup menu opens.2. Click the buttons to open the respective windows.TIMER SETUP: Specifies the schedule and parametersfor timer recordings.REC SETUP: Specifies the parameters for manual andalarm recordings.EXT REC SETUP: Selects optional parameters to beapplied to the recording while the switch connectedexternally to the EXT REC terminal turns on.DISPLAY SETUP: Specifies time-and-date and otherdisplays of status information.SYSTEM SETUP: Specifies password-protection, andsimultaneous REC&PLAY.ALARM SETUP: Specifies alarm-related monitoringmode, and VMD (video motion detector) mode.COMMUNICATION SETUP: Specifies parameters forserial and network communications.SWITCHER SETUP: Specifies sequence and multi-splitpatterns.WJ-HD200 SETUPSYSTEM INFORMATION: Displays various systeminformation.USER SETUP: Specifies users, passwords, andaccess levels.HOST SETUP: Specifies hosts and access levels.FTP SETUP: Specifies parameters for transmitting files.MAIL SETUP: Specifies senders, and receivers.NETWORK VIDEO SETUP: Specifies application soft-ware for video translation, and sequence steps.3. To return to the MAIN CONTROL PANEL, click the[Main Control Panel] tab or [BACK] button in the win-dow. Timer Setup (TIMER SETUP) Timer Recording (TIMER REC)OFF: Runs recording when manually operated, notusing any timer. Recording parameters are speci-fied in the REC SETUP window.INT: Runs recording with the programmed picture qual-ity within the time zone scheduled on the internaltimer.EXT: Runs recording when the externally connectedtimer switch turns on and supplies power to therecorder (Power-on recording). Recording parame-ters are specified in the REC SETUP window.Note: Buttons in the setup menus may appear with athicker border when using a browser in WindowsXP.