Panasonic WJ-HD200 Operating Instructions Manual

Also see for WJHD200 - Digital Disk Recorder: Operating instructions

Contents

Panasonic WJ-HD200 Operating Instructions Manual Manual pdf 7 page image

7MAJOR OPERATING CONTROLS AND THEIR FUNCTIONS Front ViewOPERATEALARMSUSPENDRESETHDDFULLERROROSDMULTISCREENSELECTZOOMTIMER DSTREMOTELOCK SEQUENCE ALARMSERCHSTOPPLAY MODE SELECTSETUP/ESCPLAYTIME&DATESEARCHREC STOPSPOTMULTICAMERA SELECTALARMRECALLRECPUSH— PAUSE SETDigital Disk Recorder WJ-HD20015263748q w er u o !1 !5t y i !0 !2 !3 !4 !8 !9!7 @0@2@1 @3!6 @4 @5@6 @7q Operate Indicator (OPERATE)Lights up when the power of the WJ-HD200 Digital DiskRecorder is turned on.w Alarm Indicator (ALARM)Blinks when an alarm condition exists. It changes tosteady light when the activated alarm is reset after theauto-reset time has elapsed.To turn the indicator off, press the ALARM RESET but-ton.e Alarm Suspension Indicator (SUSPEND)Lights up when the alarm suspension mode is selected.r Alarm Reset Button (RESET)Pressing this button cancels an activated alarm, andreturns the system to the condition before the alarmwas activated.t Timer Indicator (TIMER)Lights up when the internal timer works after setting theTIMER to INT (internal) in the menu setup. It blinks whilerecording during the specified start and end time.y Remote Indicator (REMOTE)Lights up when the recorder is remotely controlled viathe serial port or 10BASE-T/100BASE-T port on the rearpanel.u Lock Button (LOCK)Holding down the button for 2 seconds will enable ordisable the button lock function. While locked, the but-tons at the front panel are not operable and the LED inthe LOCK button lights up.i Daylight Saving Time (DST)The button is recessed inside the front panel opening.Pressing this button shifts the internal clock to the sum-mer time or vice versa.o On Screen Display Button (OSD)Toggles the "on screen display" (OSD) on and off. Youcan eliminate OSD when it veils a portion on the monitoryou wish to observe. OSD includes the time and date,alarm status, camera title, and recorder status. The sta-tus information is displayed only on the multiscreenmonitor.!0 Monitor Selection Button (SPOT/MULTI)Toggles the monitor selection between the spot monitorand multiscreen monitor you wish to control.When the spot monitor is selected, the LED in the but-ton lights up.!1 Sequence Button (SEQUENCE)Runs the assigned sequence on the selected monitorfor the specified duration. Pressing this button pausesthe sequence, or restarts the paused sequence.The LED in the button lights up when running, or blinkswhen pausing.!2 Camera Selection Buttons (CAMERA SELECT)Pressing a button selects the input live image, or therecorded image of the specified input. The LED in thebutton indicates the status of the camera input as fol-lows.Green: The input displayed on the monitor is not beingrecorded, but is a live or playback image.Yellow: The input is displayed on the monitor, and isrecorded on the hard disk.