Panasonic WJ-HD200 Operating Instructions Manual

Also see for WJHD200 - Digital Disk Recorder: Operating instructions

Contents

Panasonic WJ-HD200 Operating Instructions Manual Manual pdf 46 page image

46 External ResetThe activated alarm event except video motion detection, isreset when the recorder receives an external reset signalfrom the connected device via the REMOTE/ALARM con-nector on the rear panel.The ALARM indicator changes from blinking to a steadylight. Pressing REC STOP ButtonPressing the [REC STOP] button resets alarm status andrecording when MONITOR MODE is set to OFF. WhenSPOT is set, only the [ALARM RESET] button will resetalarm status and recording. Suspending Alarm InputThis function may be convenient during setup procedures.When enabled, any alarm input is ignored and the recorderperforms as follows.• The alarm event will be stored in the alarm log.• The recorder enters alarm recording.• The alarm buzzer does not sound.• The SUSPEND indicator lights up.1. Hold down the alarm [RESET] button and [LOCK] but-ton simultaneously to enable the suspension function.The SUSPEND indicator lights up.2. Do the same as above to reset the suspension function.The indicator turns off.ALARMSUSPENDRESETTIMERREMOTELOCK Alarm Log Recall & SearchThe ALARM RECALL window displays the alarm event login chronological order with event numbers, dates, times,and the activation sources. A maximum of 2 000 events canbe stored.T: Alarm terminal was activated.V: VMD was activated.P: Alarm event notification from the PC.Note: In some cases the log displayed in the ALARMRECALL list may apply to the previous alarm recordthat was overwritten after selecting CONTINUE for theDISK END MODE. This is because the alarm log isupdated later than the image data. To Browse through Log1. Hold down the JogDial for 2 seconds. The monitor dis-plays the ALARM RECALL list.2. Rotate the JogDial to scroll up or down the page.Scrolling speed is selected in the menu setup.3. Hold down the JogDial for 2 seconds to quit the ALARMRECALL list and go back to the previous window. To Sort by Channel1. Hold down the JogDial for 2 seconds to display theALARM RECALL list. The log of all channels appears.2. Press the desired channel [CAM SEL] button. The indi-cator on the button lights up, and only the log of theselected channel will be displayed.3. Press another channel button to select a new channel.REC STOPALARM RECALL YEAR03NO. DATE TIME ALM1543 OCT30 23:58:12 T11542 OCT30 23:52:54 V21541 OCT30 23:40:29 V31540 OCT30 23:39:50 T41539 OCT30 23:35:41 L21538 OCT30 23:30:22 L11537 OCT30 23:25:55 T21536 OCT30 23:21:09 T2(TOTAL 1543EVENTS)TO SEARCH PUSH T&D KEYALARM RECALL YEAR03NO. DATE TIME ALM0003 OCT20 23:52:54 V20002 OCT20 23:51:54 V20001 OCT20 23:50:54 V2PUSH JOG→DATA CLEAR.(TOTAL 1543EVENTS)TO SEARCH PUSH T&D KEY