Panasonic WJ-HD200 Operating Instructions Manual

Also see for WJHD200 - Digital Disk Recorder: Operating instructions

Contents

Panasonic WJ-HD200 Operating Instructions Manual Manual pdf 76 page image

Slow image refreshment and/or slowresponse to operationsRemote operations are not acceptedwhile BUSY indicator is lit.When accessing via the network:76PhenomenonPower is not turned on.Error message "NO DISK" is displayedon the monitor.Connect the power cord to AC outlet.TROUBLESHOOTINGPower cord not properly connectedNo disk availableDisconnection of camera, cameracable, or VIDEO IN BNC.Ventilation blocked, or failure of coolingfanHDD status may have changed, or amalfunction may have occurred.Lens cap not removed from the cam-era, some device is not turned on, orbrightness and contrast of the monitorare improperly adjusted.Refer to HDD MAINTENANCE inAppendix to confirm the HDD status.Consult your dealer when a malfunctionis found.Connect the respective camera, cable,or connector properly.Remove obstacles, or consult yourdealer for servicing.Reset the recorder to the factorydefaults (page 24) and enter a newpassword.Check the HDD status referring to HDDMAINTENANCE. Consult your dealerwhen a malfunction is confirmed.Detach the lens cap, turn on thedevice, or adjust the monitor.Error message "CH n LOSS (n=1-8)" isdisplayed on the monitor.Error message "TEMP ERROR" is dis-played on the monitor.Administrator password cannot berecalled.DISK MENU appears when turning onthe power.Camera picture is not displayed on themonitor.Cause What to doNine-split display does not function. Set it to ALL.QUAD ONLY may be set for MULTISELECT MODE.Setup menus supplied from the MatrixSwitcher are not recorded.The WJ-HD200 does not record non-interlace video.Wait until the preceding accesses end.Wait until the preceding accesses end.Front panel buttons on the recorder arebeing operated, or more than four PCsaccess the recorder.Network is busy.Intermittent sound reproduction Network is busy.No click sound desired. Change the setting as follows: ControlPanel → Sound Multimedia → SoundTab → Explorer → OFFDefault setting is ON.