Panasonic WJ-HD200 Operating Instructions Manual

Also see for WJHD200 - Digital Disk Recorder: Operating instructions

Contents

Panasonic WJ-HD200 Operating Instructions Manual Manual pdf 41 page image

TMLVM*WR2 Writing error on HDDMaster HDDMaster HDDSlave HDDRV2RV1HD1HD2POWERRPower disconnection due toelectricity failure/trouble hasbeen detected.Thermal error Temperature exceeds theoperating range.41 System Information(SYSTEM INFORMATION) HDD Hour Meter (HDD HOUR METER)The meter shows how many hours each hard disk has beenoperated in playback, recording and idle. The built-in HDDneeds replacement when the hour meter reads around30 000 H. HDD Capacity (HDD CAPACITY)The total usable capacity of the built-in hard disk is indicat-ed. Default (DEFAULT)This enables the recorder to restore all setup data to thedefault values.1. Press the JogDial to move the cursor to DEFAULT.2. When the cursor is on SET→, press the JogDial again.3. Select YES or NO with the JogDial, and press theJogDial.The default is NO.NO: Current setup data is retained.YES: Current setup data is reset to the default values.When all setup data are reset to the defaults, "SETDONE" is displayed for a few seconds and thenchanges to SET→.Note: The recorder will restart when the network setup hasbeen changed and the menu is closed. System Version (SYSTEM VERSION)This line displays the version number of the installed sys-tem software. You will need the version number whenupdating the software. System Log (SYSTEM LOG)The system log is displayed on the monitor with event num-bers, dates, times, and causes.SYSTEM INFORMATIONHDD1 HOUR METER 10000HHDD2 HOUR METER 10000HHDD CAPACITY 228.99GDEFAULT→ SET→SYSTEM VERSION X.XXSYSTEM LOGOSYSTEM LOG (1 OF 10)NO. DATE TIME CAU99 FEB28.03 6:50:06 WR198 FEB28.03 5:23:51 HD197 FEB20.03 10:10:23 HD296 FEB15.03 23:50:42 RV195 FEB11.03 23:52:10 FLL94 JAN31.03 19:43:32 TML93 JAN30.03 19:50:14 LS192 JAN15.03 19:52:54 FL%91 JAN10.03 10:40:22 TM490 JAN01.03 10:50:20 LS1WR1 Writing errorHDD automati-cally removed Slave HDDS.M.A.R.Tdetects anerror on HDD.HDD XX%TM* ALMTerminal alarm event waslogged, but no picturerecorded. * = 1-8VMD VMD event was logged, butno picture recorded. * = 1-8LS* LOSS Video input loss on channel# (*). * = 1-8PC* PC PC alarm was logged, butno picture recorded. * = 1-8PowerError Errors other than shownaboveHDD is FULL.Warning, HDD is nearing tothe end.HDD FULLFLLFL%Abbreviation Cause Description