19■ Extended FunctionsThe recorder connections will provide the following extend-ed functions.● Connection to a RecorderThe time-lapse recording and playback of all the cameraimages connected to the unit are possible.Each camera's image and camera ID are recorded.You can search and play back the desired camera's imageby the camera ID.The time-lapse recording is conducted as following.The operations are conducted with the buttons on therecorder, system controller or PC.• The setup of the recording device• The start of the playback• The stop of the playback• The playback of the recorded images (the multiscreendisplay, still spot picture or still multiscreen picture,etc.)• The search for the recorded image (the search by thecamera ID, or the recorded time and date)• Forward or backward search• Forward of backward field advance• Fast-forward• Rewind• IndexRefer to each device's operating instructions for details.■ System Status TableThe current system status can be identified.The continuous display becomes possible by the OSD set-ting.MON: Monitor's unit address numberCAM: Camera No.MODE: Operation modeKB: Controller's unit address numberOPE: Operator numberPRI: Priority■ Setup ProceduresTo use the unit, it is necessary to configure the systemthrough the following setup procedures:• OSD setup with an active monitor and system controllerThe basic parameters are configurable to operate theunit.• SX150 Admin Console with the PCThe setup utility can configure all the functions of theunit.Refer to p. 44 WJ-SX150 SETUP MENU (OSD) and p. 51SX150 ADMIN CONSOLE for details.SYSTEM STATUSMON CAM MODE KB OPE PRI1 01 T01 K1 1 302 02 SPOT K2 2 23 04 ALARM K4 4 14 16 CAM PC 30 1StarttCamera1 Camera 2 Camera 3 Camera 4 Camera 5t
