Panasonic WJ-SX150 Operating Instructions Manual

Also see for WJSX150 - SWITCHER - ADDENDUM: Addendum Addendum manual Operating instructions

Contents

Panasonic WJ-SX150 Operating Instructions Manual Manual pdf 84 page image

871. Press the RESET button while holding down the SHIFTbutton.2. The monitor, the LED display and the indicator willchange as follows:"ALARMnn" will disappear from the monitor.The LED display will return to the state before thealarm input.The alarm indicator will go out.The CAM indicator will return to the state before thealarm input.■ Suspending the Alarm InputsUse this function when you do not want to be disturbed byan alarm input, for example, during the setup procedures.1. Press the ACK/SUSPEND button while holding downthe SHIFT button."ALM SUSPENDED" will appear on the monitor.2. To cancel alarm suspension, press the ACK/SUSPENDbutton while holding down the SHIFT button again."ALM SUSPENDED" will disappear from the monitor.Notes:• An alarm continues to operate even after it is suspend-ed.• If you suspend an alarm while an alarm image is dis-played, "ALM SUSPENDED" will not appear on the moni-tor. Reset the alarm, and then suspend it again.■ Resetting the Alarm InputsThere are two alarm reset functions:• Alarm reset (resetting the alarm inputs according to theinput order)• Alarm all reset (resetting all the alarm inputs)● Alarm Reset1. Select a monitor which displays "ALARM".2. When more than one alarm signal has been input, thesecond earliest alarm image appears on the monitor,after the current alarm image is reset.3. To reset all the alarms, repeat steps 1 and 2. The moni-tor, the LED display and the indicator will change as fol-lows:"ALARMnn" will disappear from the monitor.The LED display will return to the state before thealarm input.The alarm indicator will go out.The CAM indicator will return to the state before thealarm input.Note: When more than one alarm is input and they areassociated with the same monitor, they will be reset oneby one.● Alarm All ResetT&D CAM ID EVENTAUX1 ONAUX1 OFFSTILLALL RESETRESETTOUR SEQAlarminput 1Alarminput 5Alarminput 2• Description about alarm resetMonitor 1Matrix switcherALARM01*ALARM05*ALARM02ALL RESETRESETALL RESETRESETMonitor 1TimeSHIFTPAUSENEXTPAUSEMON LOCKDEF ONWIPERDEF OFFMON (ESC)T&D CAM IDMON STATUS ALLEVENTALM H VLD H SYS SCAM (SET)MULTI SCREEN SELSEQUENCEAUX2 ONAUX2 OFFEL-ZOOMAUX1 ONAUX1 OFFSTILLALL RESETRESETTOUR SEQMON LOCKDEF OMON (ESC)T&D CAMMON STATUS ALLALM H VLDMULTI SCRESEQUENCEAUX2 OEL-ZOOMAUX1 OSTILLSHIFTREW/FFSTEPGROUP SEQPAUSESUSPEND ALL RESETACK RESETTOUR SEQPREV NEXTOSDPLAY PAUSEALM SUSPENDED