Panasonic WJ-SX150 Operating Instructions Manual

Also see for WJSX150 - SWITCHER - ADDENDUM: Addendum Addendum manual Operating instructions

Contents

Panasonic WJ-SX150 Operating Instructions Manual Manual pdf 46 page image

48The factory default setting is N.O.Notes:• Use N.O. type master clock.• If TIME is selected, an alarm input terminal can adjustthe clock by ±30 seconds with an N.O. type signalinput. For example, when the clock time is between00:59:30 and 01:00:30, it will be automatically adjustedto 01:00:00 by the master clock.After the configuration, press the MON (ESC) button. Themonitor display returns to 400 ALARM SETUP.SERIAL PORTON: This stands for that an alarm input is accepted viaSERIAL.OFF: This stands for that an alarm input is not acceptedvia SERIAL.The factory default setting is ON.After the configuration, press the MON (ESC) button. Themonitor display will return to the previous menu.After all the configurations, press the SETUP button whileholding down the SHIFT button. The configuration will beupdated when closing SETUP MENU.■ CAMERA TITLE● How to DisplayTo display this menu on the monitor, move the cursor to 500CAMERA TITLE in SETUP MENUby moving the joystick to▼ or ▲. Then, press the CAM (SET) button. The submenuappears on the monitor.● How to editA camera title is composed of up to 20 characters.The first four characters (C01_(space) to C16_) are fixedand the subsequent 20 are editable.The characters available here are the following:ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789!"#$%&'()*+,-./:;=?_(space)The factory default settings are same as the illustrations.1. Edit the camera titles by pressing the NEXT or PREVbuttons.The NEXT button toggles these characters in this order.The PREV button toggles these characters in a reverseorder.Joystick and the CLEAR button are also usable for theedit. (Refer to p. 44 Displaying SETUP MENU for eachuse.)2. After the configuration, press the MON (ESC) button.The monitor display will return to the previous menu.After all the configurations, press the SETUP button whileholding down the SHIFT button. The configuration will beupdated when closing SETUP MENU.Notes:• When moving the joystick to ▼ at the bottom of CAM-ERA TITLE 1 of 2, the monitor will display 2 of 2 (thenext page).• When moving the joystick to ▲ at the top of CAMERATITLE 2 of 2, the monitor will display 1 of 2 (the previouspage).• Original characters are configurable through SX150Admin Console, but they are not displayed correctly inSETUP MENU. They are displayed as ■. (Refer to p. 64Edit Font window.)■ SYSTEM SETUP● How to DisplayTo display this menu on the monitor, move the cursor to 600SYSTEM in SETUP MENU by moving the joystick to ▼ or ▲.Then, press the CAM (SET) button. The submenu appearson the monitor.● ParametersMove the joystick to move the cursor.500 CAMERA TITLE 1 of 2CAM TITLE12345678500 CAMERA TITLE 2 of 2CAM TITLE910111213141516600 SYSTEM610 COMPENSATION/VD2/DATAO620 RS485 CAMERAO630 DATA4/PSD PORT SELECT PSD640 PSD PORT SPEED 9600bps650 SERIAL PORT SPEED 38400bps660 EXT IN GENLOCK OFF670 CAMERA CLEANING OFF