Panasonic WV-CW970 Service Manual

Also see for Super Dynamic III WV-CW974: Product catalog Product catalog Brochure & specs Specifications Operating instructions

Contents

2-11Fig. 4-1-68 Press the ENTER key for next adjustment.(7.2) Video Output Gain (H) AdjustmentTest Point: Video Output Connector8 Keep the Colour Temperature at 3 200°K.8 Adjust data with the ARROW keys so that the Video sig-nal level becomes 700 mV ± 50 mV as shown in Fig. 4-1-6.8 Press the ENTER key for next adjustment.700 mV ± 50 mV(8.1) Burst Level R AdjustmentTest Point: Video Output Connector8 Keep the Colour Temperature at 3 200°K.8 Aim the Camera at the Logarithmic Gray Scale Chart.8 Connect the terminated Oscilloscope with 75 Ω to theVideo Output Connector.8 Adjust data with the ARROW keys so that the Burst levelbecomes 300 mV ± 10 mV as shown in Fig. 4-1-7.8 Press the ENTER key for next adjustment.(8.2) Burst Level B AdjustmentTest Point: Video Output Connector8 Keep the Colour Temperature at 3 200°K.8 Adjust data with the ARROW keys so that the Burst levelbecomes 300 mV ± 10 mV as shown in Fig. 4-1-8.8 Press the ENTER key for next adjustment.(6) ALC DC AdjustmentObserve: Video Monitor8 Confirm the Colour Temperature at 3 200°K.8 Aim the Camera at the Logarithmic Gray Scale Chart.8 Adjust data with the ARROW keys so that the seconddata from left becomes between 00 and 05 on the VideoMonitor as shown in Fig. 4-1-5.8 Press the ENTER key for next adjustment.(7.1) Video Output Gain (L) AdjustmentTest Point: Video Output Connector8 Keep the Colour Temperature at 3 200°K.8 Aim the Camera at the Logarithmic Gray Scale Chart.8 Connect the terminated Oscilloscope with 75 Ω to theVideo Output Connector.8 Adjust data with the ARROW keys so that the Video sig-nal level becomes 700 mV ± 50 mV as shown in Fig. 4-1-6.Fig. 4-1-7300 mV ± 10 mV300 mV ± 10 mVFig. 4-1-8Fig. 4-1-500 00 00 00 1C 10 88 30(Data are just example.)Second data becomes between 00 and 05.