Panasonic WV-S2500 Series Operating Instructions Manual

Contents

Panasonic WV-S2500 Series Operating Instructions Manual Manual pdf 136 page image

2.7.4.6 Configure settings relating to HTTP alarm notification when analarm occursClick “HTTP alarm notification setup >>” of “Camera action on alarm” on the [Alarm] tab of the “Alarm” page.(®page 130)Refer to page 145 for information on configuration for these settings.2.7.5 Configure the VMD settings [VMD area]Click the [VMD area] tab on the “Alarm” page. (®page 41, page 42)The video motion detection areas can be set on this page.Up to 4 areas can be set. When motion is detected in the set area, it will be regarded as an alarm.IMPORTANT• The alarm occurrence indication button (®page 12) will be displayed when motion is detected by theVMD function.• The alarm occurrence indication button will be displayed when receiving an alarm input of a terminalalarm or a command alarm.• Depending on the network environment, notification may be delayed even when “Real time” is selectedfor “Status update mode” on the [Basic] tab of the “Basic” page (®page 62).• After configuring the VMD area, the VMD area may move out of alignment when “Image capturemode” of the [Image] tab is changed. Make sure to check the VMD area after changing the “Imagecapture mode” setting.136 Operating Instructions2 Settings