2. Enter the information of the certificate to be generated.Item Description Available number of characters[Common Name] Enter the camera address or host name. 64 characters[Country] Enter the country name. 2 characters (Country code)[State] Enter the state name. 128 characters[Locality] Enter the locality name. 128 characters[Organization] Enter the organization name. 64 characters[OrganizationalUnit]Enter the unit name of the organization. 64 characters[CRT key] Displays the key size and generation time & dateof the current key.—3. Click the [OK] button after entering the items.→ The [Save As] dialog box will be displayed.4. Enter a file name for the CSR in the [Save As] dialog box to save on the PC.→ The saved CSR file will be applied to the CA.IMPORTANT• The certificate will be issued for the set of the generated CSR and CRT key. If the CRT key isre-generated or updated after applying to the CA, the issued certificate will be invalidated.Note• This camera generates the CSR file in the PEM format.2.4.4.3 Installation of the certificate issued by CAIMPORTANT• If the CSR file is not generated, it is impossible to install the certificate (CA certificate) issued by CA.• For the installation of the certificate issued by CA, the CA certificate issued by CA is required.1. Click the [Browse...] button of “CA Certificate - Certificate install”.→ The [Open] dialog box will be displayed.2. Select the certification file and click the [Open] button. Then, click the [Execute] button.→ The certification will be installed.Note• The host name registered in the installed certificate will be displayed on “CA Certificate -Information”. Depending on the status of the certificate, the following are displayed.Indication DescriptionInvalid The CA certificate is not installed.[Host name of the certificate] The certificate has already been installed andvalidated.Expired The certification has already expired.80 Operating Instructions2 Settings
