Item Description Available number of characters[State] Enter the state name. 128 characters[Locality] Enter the locality name. 128 characters[Organization] Enter the organization name. 64 characters[OrganizationalUnit]Enter the unit name of the organization. 64 characters[CRT key] Displays the key size and generation time & dateof the current key.—Note• To use the CA certificate, follow the requests from the CA about the information to be entered.• The available characters for [Common Name], [State], [Locality], [Organization], [OrganizationalUnit] are 0-9, A-Z, a-z and the following marks.- . _ , + / ( )3. Click the [OK] button after entering the items.→ The [Save As] dialog box will be displayed.4. Enter a file name for the CSR in the [Save As] dialog box to save on the PC.→ The saved CSR file will be applied to the CA.IMPORTANT• The CA certificate will be issued for the set of the generated CSR and CRT key. If the CRT key isre-generated or updated after applying to the CA, the issued CA certificate will be invalidated.Note• This camera generates the CSR file in the PEM format.2.9.3.6 Installation of the CA certificateIMPORTANT• If the CSR file is not generated, it is impossible to install the CA certificate.• For the installation of the CA certificate, the CA certificate issued by CA is required.1. Click the [Browse...] button of “CA Certificate - CA Certificate install”.→ The [Open] dialog box will be displayed.2. Select the CA certificate file and click the [Open] button. Then, click the [Execute] button.→ The CA certificate will be installed.Note• The host name registered in the installed CA certificate will be displayed on “CA Certificate -Information”. Depending on the status of the CA certificate, the following are displayed.Indication DescriptionInvalid The CA certificate is not installed.[CA certificate Host name] The CA certificate has already been installed andvalidated.184 Operating Instructions2 Settings
