AUX title[AUX (Up to 10 characters)]Enter the name for “AUX” on the “Live” page.• Unavailable characters: " &• Default: AUX[Open (Up to 5 characters)]Enter the name for “Open” of “AUX” on the “Live” page.• Unavailable characters: " &• Default: Open[Close (Up to 5 characters)]Enter the name for “Close” of “AUX” on the “Live” page.• Unavailable characters: " &• Default: CloseNote• AUX is a camera terminal that allows users to operate (Open/Close) arbitrarily from the “Live” page.For example, an operator can remotely control lights in a place where the camera is installed byconnecting the terminal to the light controller.13.4 Configure the settings relating to the cameraaction on alarm occurrence [Alarm]Click the [Alarm] tab on the “Alarm” page. (®page 44, page 46)The settings related to the camera action on alarm can be configured in this section.• [Alarm E-mail notification]Click “E-mail server >>” to display the setup menu that can configure the settings relating to E-mailnotification when an alarm occurs. The setup menu will be displayed in a newly opened window.(®page 111)• [Alarm image FTP transmission]Click “FTP >>” to display the setup menu that can configure the settings relating to FTP transmission whenan alarm occurs. The setup menu will be displayed in a newly opened window. (®page 112)• [Alarm image recording(SD memory card)]Click “SD memory card >>” to display the setup menu that can configure the settings relating to recordingimages on an SD memory card when an alarm occurs. The setup menu will be displayed in a newly openedwindow. (®page 112)• [Panasonic alarm protocol]110 Operating Instructions13 Configure the alarm settings [Alarm]
