Setting up Compax3 Positioning via digital I/Os76 192-120101 N11 C3I11T11 November 2007Configuration sequence:The Compax3 ServoManager can be installed directly from the Compax3DVD. Click on the appropriate hyperlink or start the installation program"C3Mgr_Setup_V.... .exe" and follow the instructions.PC requirementsRecommendation:Operating system: MS Windows XP SP2 / MS Windows 2000 as from SP4 / (MS Vista)Browser: MS Internet Explorer 6.xProcessor: Intel Pentium 4 / Intel Core 2 Duo / AMD Athlon class as from>=2GHzRAM memory: >= 1024MBHard disk: >= 20GB available memoryDrive: DVD driveMonitor: Resolution 1024x768 or higherGraphics card: on onboard graphics (for performance reasons)Interface: USBMinimum requirements:Operating system: MS Windows XP SP2 / MS Windows 2000 as from SP4Browser: MS Internet Explorer 6.xProcessor: >= 1.5GHzRAM memory: 512MBHard disk: 10GB available memoryDrive: DVD driveMonitor: Resolution 1024x768 or higherGraphics card: on onboard graphics (for performance reasons)Interface: USBNote: For the installation of the software you need administrator authorization on thetarget computer. Several applications running parallelly, reduce the performance and operability. especially customer applications, exchanging standard system components(drivers) in order to improve their own performance, may have a strong influenceon the communication performance or even render normal use impossible. Operation under virtual machines such as Vware Workstation 6/ MS Virtual PC isnot possible. Onboard graphics card solutions reduce the system performance by up to 20%and cannot be recommended. Operation with notebooks in current-saving mode may lead, in individual cases,to communication problems.Your PC is connected with Compax3 via a RS232 cable (SSK1 (see page 289)).Cable SSK1 (see page 289) (COM 1/2-interface on the PC to X10 on the Compax3or via adapter SSK32/20 on programming interface of Compax3H).Start the Compax3 servo manager and make the setting for the selected interfacein the menu"Options Communication settings RS232/RS485...".In the menu tree under device selection you can read the device type of theconnected device (Online Device Identification) or select a device type (DeviceSelection Wizard).Installation of the C3ServoManagerConnection betweenPC - Compax3Device Selection
