6–Fibre Channel Noninteractive Commands-fwdump (Firmware Dump)SN0054667-00 G 6-15The following restrictions apply: Under Solaris, the driver configuration feature is disabled if you are using thedriver from the OS installation CDs (QLC driver). Under Linux, this feature is disabled if you are using the input/output control(IOCTL) driver. Under Mac OS ®, the BindWWPN and BindPortID parameters are notchangeable; Mac OS supports only the BindWWPN parameter.-fwdump (Firmware Dump)To save the current adapter port firmware dump to a file, issue the followingcommand:# qaucli -pr fc -fwdump (<hba instance> | <hba wwpn>) <file name>Where:-g (Generate Reports)To run a report containing host information and more, issue the -g command.-gs (Configure Parameters [FC Port Statistics])To configure the adapter statistics, issue the -gs command as follows:# qaucli -pr fc -gs ( <hba instance> | <hba wwpn>) [(<param name> |<param alias>) <param value>]Where:hba instance = Adapter instance number of an adapter port (use the-g command to find)hba wwpn = World wide port name of the adapterfile name = Name of the file to save the firmware dump tohba instance = Adapter number (use the -g command to find)hba wwpn = World wide port name of the adapterparam name = Name of the parameterparam alias = Alias of the parameterparam value = New value of the parameter
