9–NIC Interactive CommandsNIC Port Setting Configuration (-c)SN0054667-00 G9-7Display Configured Port Settings (-iset)2. Adapter Configuration1. CNA Configuration2. NIC Port Setting Configuration1. Display Configured Port SettingsFrom the Port Settings Menu, select theDisplay Configured Port Settingsoption to view the configure port parameters. For example:IPv4_Checksum_Offload_Enable:RxTxJumbo_Frames_MTU_9000_Enable:offLOCAL_Administered_Address_MAC:00:0e:1e:04:d3:34Port_Alias:NonePort_Wake_On_LAN_Option:DisabledPort_PXE_Enable:offFlow_Control:RxTxEnabledMax_Jumbo_Buffers:1024Receive_Buffer_Count:4096Transmit_Buffer_Count:1024Configure Port Settings2. Adapter Configuration1. CNA Configuration2. NIC Port Setting Configuration2. Configure Port SettingsFrom the Port Settings Menu, select theConfigure Port Settingsoption toconfigure port parameters. For example:IPv4_Checksum_Offload_Enable(off,Rx,Tx,RxTx)[RxTx]:Jumbo_Frames_MTU_9000_Enable(on,off)[off]:WOLavailableoptions:0=Disabled,1=WakeonMagicFrame,Port_Wake_On_LAN_Option[Disabled]:Port_PXE_Enable(on,off)[off]:Flow_Control(Rx,RxTx)[Rx TxEnabled]:Max_Jumbo_Buffers(128,256,512,1024)[1024]:Receive_Buffer_Size(1024, 2048,4096,8192)[4096]:Transmit_Buffer_Size(128, 256,512,1024)[1024]:Change Port Alias Name (-n)2. Adapter Configuration1. CNA Configuration2. NIC Port Setting Configuration3. Change Port Alias NameFrom the Port Settings Menu, select theChange Port Alias Nameoption tochange the port alias. For example:Port_Alias[None]:port_aliasSuccessfullysavedPortAlias
