6–Fibre Channel Noninteractive Commands-q (Target Link Speed [iiDMA])6-34 SN0054667-00 GIf both target id and lun id are omitted, the -pl command lists all udev namesthat are currently assigned to all devices attached to a physical port on the adapter.To remove a udev persistent device name from a LUN, issue the following command:# qaucli -pr fc -pl (<hba instance> | <hba wwpn>) --del{<target ID> ID> <lun name>}To add a udev persistent device name to a LUN, issue the following command::# qaucli -pr fc -pl (<hba instance> | <hba wwpn>) --set{<target ID> ID> <lun name>}-q (Target Link Speed [iiDMA])To view the link speed of all targets attached to one adapter or all adapters, issuethe -q command as follows:# qaucli -pr fc -q (<hba instance> | <hba wwpn> | <all>) [-targets| -t ]Where:To view the link speed of a specific target attached to an adapter, issue thefollowing command:# qaucli -pr fc -q (<hba instance> | <hba wwpn> | <target wwpn>NOTEBraces {} denote parameters to be specified as a group. The group can bespecified more than once. For example:...targetID1 lunID1 lun_name1 targetID2 lunID2 lun_name2NOTEThe -q option is supported only on 4Gb adapters.hba instance = Adapter number (use the -g command to find)hba wwpn = World wide port name of the adapterall = Reports link speed for all targets on all adapters in the system-targets = All targets-t = All targets
