7–iSCSI Noninteractive Commands-c (CNA Port Information—iSCSI)7-6 SN0054667-00 GTo update the boot code image, issue the -bootcode command as follows:-bootcode <bootcode image file name>-c (CNA Port Information—iSCSI)To view the configured settings for the port, issue the -c command as follows:-c [hba_port_inst]When you specify a port instance, information for only that adapter is shown.When you do not specify a port instance, information for all adapter ports in thesystem is shown.-ch (CNA Adapter Information—iSCSI)To display the adapter’s configured settings, issue the -ch command as follows:-ch [hba_port_inst]When you specify a port instance, information for only that adapter is shown.When you do not specify a port instance, information for all adapter ports in thesystem is shown.-chapmap (Display Targets Using CHAP Entries)To display the map of targets to CHAP table entries, issue the -chapmapcommand as follows:-chapmap -cpbootcode (Clear Primary Boot Target Information)To clear the primary boot target and LUN, issue the -cpbootcode command asfollows:-cpbootcode -csbootcode (Clear Secondary Boot Target Information)To clear the secondary boot target and LUN, issue the -csbootcode commandas follows:-csbootcode NOTEThis command is not active for the PPC.
