8–NIC Partitioning (NPAR) Noninteractive Commands-ifSN0054667-00 G8-5-ifTo view a list of NPAR physical functions, issue the-ifcommand as follows:>qaucli-npar-if-ipTo view a list of the NPAR physical ports, issue the-ipcommand as follows:>qaucli-npar-ip-peswitchcfgTo change eSwitch physical port configuration, issue the-peswitchcfgcommand as follows:>qaucli-npar-peswitchcfg <port_inst><option><value>>Table 8-2 lists the availableandpairs for this command.-pinfo(NPAR Port Information)To view NPAR port information, issue the-pinfocommand as follows:>qaucli-npar-pinfoWhere:<port_inst>is the physical port number displayed by the-ipcommand.<func_inst>is the physical function number displayed by the-ifcommand.-restoreeswitchcfg(Restore eSwitch Configuration)To restore eSwitch configuration, issue the-restoreeswitchcfgcommandas follows:>qaucli-npar-restoreeswitchcfgTable 8-2. eSwitch Physical Port OptionsOptionValueipv4_tsoEnable (1) or disable (0) IPv4 TSO configurationipv6_tsoEnable (1) or disable (0) IPv6 TSO configurationlayer4_coEnable (1) or disable (0) Layer 4 checksum offload configuration
