11–Converged Network Adapter Interactive CommandsCNA FCoE ConfigurationSN0054667-00 G 11-27If you currently have boot device information set up in the HBAparameters, updating the HBA Parameters from a filewill preserve that information.Do you want to proceed with the operation?1: Yes2: NoTarget Persistent Binding2. Adapter Configuration1. CNA Configuration1. CNA FCoE Configuration4. Target Persistent BindingFrom the Converged Network Adapter (CNA) FCoE Configuration menu, selectthe Target Persistent Binding option to configure target persistent binding. Fromthe port menu, select a port to open the Target Persistent Binding Menu withoptions to display the configuration, bind targets, and unbind targets. Forexample:Converged Network Adapter (CNA) FCoE ConfigurationCNA Model QLE8242 SN: AFE1028C038991. Port 1 [Protocol(s): NIC iSCSI FCoE]MAC Address: 00:0E:1E:04:95:E8WWPN: 21-00-00-0E-1E-04-95-EBPort iSCSI Name: iqn.2000-04.com.qlogic:isp8214.0 Online2. Port 2 [Protocol(s): NIC iSCSI FCoE]MAC Address: 00:0E:1E:04:95:ECWWPN: 21-00-00-0E-1E-04-95-EFPort iSCSI Name: iqn.2000-04.com.qlogic:isp8214.0 SFP not installed(p or 0: Previous Menu; m or 98: Main Menu; ex or 99: Quit)Please Enter Selection: 2Target Persistent Binding Menu=======================================================CNA : 0 Port: 1SN : AFE1028C03899ENode MacAddr : 00:0E:1E:04:95:EBCNA Model : QLE8242CNA Desc. : QLE8242 QLogic Pci Express to 10GbE Dual Channel CNA (FCoE)FW Version : 4.07.31WWPN : 21-00-00-0E-1E-04-95-EBWWNN : 20-00-00-0E-1E-04-95-EBLink : Online
