6–Configuring NIC Functionality in the Converged Network AdapterConfiguring the NIC in a Windows EnvironmentFE0254601-00 A 6-25d. After successfully removing the VLAN ID assignment, press ENTER toreturn to the previous menu.Figure 6-20. Removing VLAN ID AssignmentsAfter a VLAN ID assignment has been removed, the corresponding QLogic VT-IMMiniport Driver logical interface is removed from the Microsoft Windows NetworkConnections window, and the local area connection for the teaming logicalinterface will be enabled again.PXE BootPXE boot code is a part of the QLogic 8100 Series Adapter multi-boot image thatallows a networked server to boot with the images provided by remote servers.Prerequisites for PXE BootPXE boot requires the following: A client server with a PXE-compliant BIOS or UEFI implementation and aQLogic 8100 Series Adapter installed. This server will boot through PXE withMicrosoft Windows. A DHCP or proxy DHCP server that can provide an IP address and bootserver list to the client server. A PXE boot server to deliver the PXE execution environment and theoperating system images to the client server. It is possible to configure asingle physical server as both a DHCP and a boot server.The following tasks must be completed in sequence to enable a networked serverto boot with the images provided by remote servers across the network using PXEboot.
