9–Offline UtilitiesFlasUTILFE0254601-00 A 9-15After updating the multi-boot image using FlasUTIL, issue the vpd /a /ucommand from the multi-boot image directory on the disk or USB removabledrive. This command updates the version information for the newly installedmulti-boot image.Installing the Multi-boot Image1. Install the FlasUTIL utility as described in “Installing FlasUTIL” on page 9-13.2. Locate the update.bat file, which is bundled with the multi-boot image.Ensure that all the files that are part of the multi-boot image reside in thesame directory as the update.bat file.3. Execute the update.bat file. The update.bat file contains a script thatcalls the FLASHUTIL.EXE routine (to update the multi-boot image on theQLogic adapter) and the VPD.EXE routine (to update the vital product data)./Q Quiet mode suppresses all messages on the display./S xxxx Display the serial number of the adapter at address xxxx. If youomit the address, the command displays the serial numbers of alladapters./V xxxx Display the current BIOS version of the adapter at address xxxx.If you omit the address, the command displays the BIOS versionfor all adapters./X xxxx Verify the NVRAM of the adapter at address xxxx. If you omit theaddress, the command verifies the NVRAM for all adapters./Y xxxx Display the WWPN of the adapter at address xxxx. If you omitthe address, the command displays the WWPNs for all adapters.NOTE:For QLogic adapters that are already operational with a valid multi-bootimage, use the QConvergeConsole web management GUI orQConvergeConsole CLI to update the image. For information about usingthese applications, refer to the appropriate user guide athttp://driverdownloads.qlogic.comTable 9-4. FlasUTIL Command Line Options (Continued)Option Function
