8–Configuring FCoE in a Linux EnvironmentConfiguring FCoE Parameters Using QLogic UtilitiesFE0254601-00 A 8-13To configure FCoE configuration settings using Fast!UTIL:1. Select the Select Host Adapter option.2. Select Configuration Settings.3. Select Adapter Settings, as shown in Figure 8-4.Figure 8-4. Fast!UTIL Adapter SettingsTo configure advanced adapters settings using Fast!UTIL:1. Select the Select Host Adapter option.2. Select Configuration Settings.3. Select Advanced Adapter Settings, as shown in Figure 8-4.Table 8-5. Fast!UTIL FCoE Driver ParametersAdapter Settings Advanced Adapter SettingsHost Adapter BIOSFrame SizeLoop Reset DelaySpinup DelayFibre Channel Tape SupportExecution ThrottleLUNs Per TargetEnable Target ResetLogin Retry CountPort Down Retry CountLink Down TimeoutOperation ModeInterrupt Delay TimerEnable InterruptEV Controller OrderPrimary FCF VLAN ID
