8–Configuring FCoE in a Linux EnvironmentConfiguring FCoE Parameters Using QLogic Utilities8-20 FE0254601-00 AFigure 8-6. Locating QLogic 8100 Adapter PCI DevicesFigure 8-6 shows PCI bus device IDs 85:00.2 and 85:00.3 for the two FCoEadapter ports.3. Search the qla2xxx driver to verify that the driver is managing the PCI busdevice ID as 85:00.2 and 85:00.3. For example:#ls –l /sys/bus/pci/drivers/qla2xxxThe search list in Figure 8-7 shows that the PCI device IDs, 85:00.2 and85:00.3, are listed under the qla2xxx section in sysfs.Figure 8-7. Identifying the Adapter Port PCI Device ID3. List the contents of the soft link for the device ID. For example:#cd /sys/bus/pci/drivers/qla2xxx#ls –l 0000:85:00.2/host*4. Locate the host* entries in the search list (Figure 8-8) to determine the SCSIhost ID.
