3–Installation in a Windows EnvironmentInstalling SoftwareFE0254601-00 A 3-114. In the Computer Management window, select Device Manager in the leftpane.5. Scroll down the list of hardware types in the right pane. If you are installingthe QLogic adapter drivers for the first time on this server, do the following;otherwise, go to Step 6:a. Click Other Devices to see a list of devices for which a driver is notinstalled on the server. Find each port of the QLogic adapter NICfunction that is listed as Ethernet Controller under this section.Figure 3-7 shows typical entries for a dual-port QLogic 8100 SeriesAdapter. For information about identifying QLogic devices in the OtherDevices section, refer to “Identifying Unnamed Devices” on page 3-8.Figure 3-7. QLogic 8100 Series Adapter Device Entriesb. To install the driver, right click Ethernet Controller, and then clickUpdate Driver (Figure 3-8).Figure 3-8. Installing an NIC Driver6. If you are updating QLogic adapter drivers:a. Click Network Adapters (for NIC Drivers). Find each port of theQLogic adapter NIC function that is listed as QLogic10Gb PCI Ethernet
