4 – Managing SwitchesDisplaying Switch Information4-8 59056-03 CA4.2.1Devices Data WindowThe Devices data window displays information about devices (hosts and storagetargets) connected to the switch. Click the Devices tab below the data window todisplay name server information for all devices that are logged into the selectedfabric. To narrow the display to devices that are logged into specific switches,select one or more switches in the fabric tree or the topology display. Refer to”Devices Data Window” on page 3-33 for a description of the entries in theDevices data window.4.2.2Switch Data WindowThe Switch data window displays current network and switch information for theselected switches. Refer to ”Configuring a Switch” on page 4-18 for moreinformation about the Switch data window. To open the Switch data window, selectone or more switches in the topology display, or open the faceplate display, andclick the Switch tab below the data window. Table 4-2 describes the Switch datawindow entries.Table 4-2. Switch Data Window EntriesEntry DescriptionFirst Port Address Switch Fibre Channel addressWorld Wide Name Switch World Wide NameSerial Number Number assigned to each chassis. Required for licensekeysReason for Status Additional status informationUser Name Account nameLogin Level Authority levelSuper User Super user privileges enabled/disabledUserAuthenticationEnabledEnforcement of account names and authority (alwaysTrue)Vendor Switch manufacturerFirmware Version Active firmware versionInactive Firmware Version Inactive firmware versionPending Firmware Version Firmware version that will be activated at the next resetPROM/Boot Version PROM boot version
