2 – Using SANsurfer Switch ManagerInstalling the Management Application59056-03 C 2-7A10. To ensure that you are using the most recent version of SANsurfer SwitchManager, visit the QLogic support web page and go to Drivers, Software andManuals.a. Select your switch model from the pull-down menu. Locate thedescription for SANsurfer Switch Manager for Linux under"Management Software".b. If the release version number (5.00.xx) is greater than what is currentlyinstalled on your workstation, down load the new version and proceedto step 11. Otherwise, no upgrade is needed and the SMS installationis complete.11. From the tar.gz file, extract the SANsurferSwitchMgr_Linux_5.00.xx.binfile and make the file executable.chmod +x sansurferswitchmgr_linux_5.02.xx.bin12. Execute the install program and follow the installation instructions../sansurferswitchmgr_linux_5.02.xx.bin13. When prompted for an installation directory, click the Choose button andselect the same folder as the SANsurfer Management Suite installation instep 9. The default SMS installation directory is/opt/QLogic_Corporation/SANsurfer.14. Enter the following script command from the installation directory:./chglax15. Start SANsurfer Switch Manager from SANsurfer Management suite as youdid in step 9 and confirm that the new version is running.2.2.2.3SMS Installation for SolarisTo install the SANsurfer Switch Manager application on Solaris from theSANsurfer Management Suite CD-ROM, do the following:1. Insert the SANsurfer Management Suite Disk into the managementworkstation CD-ROM drive. If the SANsurfer Management Suite start pagedoes not open in your default browser, do the following:a. Right-click the Workspace Menu.b. Select File, then select File Manager.c. In File Manager, double-click the CD-ROM folder, and thendouble-click the Sansurfer folder.d. In the Sansurfer folder, double-click the Start_Here.htm file to openthe SANsurfer Management Suite start page in your default browser.2. On the SANsurfer Management Suite start page, click the SANbox SwitchSoftware button.
