59056-03 C 1-1Section 1IntroductionThis manual describes the switch management tools which include the SANsurferSwitch Manager application (version 5.00) and the Command Line Interface (CLI)for the SANbox 5200 Series Fibre Channel switches (firmware version 5.0). TheSANbox 5200 Series switches are 20 port non-blocking Fibre Channel switches.This manual defines the features, components, and performance characteristicsof the SANbox 5200 Series switches. The SANsurfer Switch Manager applicationis the primary focus of this manual which is organized as follows: Section 1 describes the intended audience for this manual, relatedmaterials, and technical support. Section 2 describes how to use SANsurfer Switch Manager, its menus, andits displays. Section 3 describes fabric management tasks. Section 4 describes switch management tasks. Section 5 describes port and device management tasks. Appendix A describes the command line interface.A glossary of terms and an index are also provided.1.1Intended AudienceThis manual introduces the switch management products and explains theirinstallation and use. It is intended for users responsible for installing and usingswitch management tools.1.2Related MaterialsRefer to the following manuals for information about switch hardware andinstallation. SANbox 5200 Series Fibre Channel Switch Installation Guide, publicationnumber 59055-03.
