2 – Using SANsurfer Switch ManagerUsing the Topology Display59056-03 C 2-25A2.12.2Working with Switches and LinksSwitch and link icons are selectable and moveable, and serve as access points forother displays and menus. You select switches and links to display informationabout them, modify their configuration, or delete them from the display.Context-sensitive popup menus are displayed when you right-click on a switch orlink icon, or in the background of the topology display graphic window.2.12.2.1Selecting Switches and LinksSelected switch icons are highlighted in light blue. Selected ISLs are displayed asa heavier line. You can select switches and links in the following ways: To select a switch or a link, click the icon or link. To select multiple switches or links, hold down the Control key and select. To select all switches or links, right-click anywhere in the graphic windowbackground. Select Select All Switches or Select All Links from the popupmenu.To cancel a selection, press and hold the Control key, and select the item again.To cancel all selections, click in the graphic window background.2.12.2.2Arranging Switches in the DisplayYou can arrange individual switch icons in the topology display or allow SANsurferSwitch Manager to arrange all switch icons for you: To move an individual switch icon, click and drag the icon to another locationin the graphic window. Links stretch or contract to remain connected. To arrange all switch icons in the topology display automatically, open theView menu and select Layout Topology.By default, the Toggle Auto Layout box in the View menu is checked whichcauses SANsurfer Switch Manager to arrange the icons when you select LayoutTopology.You can save a custom arrangement, or layout, and restore that layout during aSANsurfer Switch Manager session. Begin by arranging the icons, then open theView menu and select Remember Layout. To restore the saved layout, open theView menu, uncheck the Toggle Auto Layout box, and select Layout Topology.
