RELM GPH Programming Instruction Manual

Also see for GPH-CMD: OPERATION AND PROGRAMMING

Contents

RELM GPH Programming Instruction Manual Manual pdf 11 page image

RELM Wireless Corporation 7Priority 2 channelAfter the Priority 1 Channel is set, the display will indicate ‘PRG PR2.’The Priority 2 Channel can be programmed as a fixed channel, tied tothe Channel Selector knob, or programmed OFF.The PR2 channel cannot be altered during normal radio operation.PR 2 OFFPRG Press the [PRI] key to cycle through thepriority channel options, or enter a fixedpriority channel using the number keys.Setting the channel to ON ties the PR2channel to the Channel Selector knob.Pressing [CLR] or the [0] key turns the PR2 channel OFF.Press the [ENT] key to store the new priority channel and advance tothe next field.channel 0 group one functions1 -- 12345PRG After the Priority 2 Channel is set the displaywill show ‘PRG 1-12345.’ This is a group offive individual functions that can be enabledor disabled.1 -- 12345PRGWhen a function is enabled, thecorresponding number in the display willflash. When the function is disabled thenumber is steady. If you wish to change thefunction from enable to disable or viceversa, press the number key correspondingto that function.EXAMPLE: If function 4 (Priority 1 Lock) is disabled, the 4 in thedisplay will not be flashing. If the [4] key is pressed, the 4 in the displaywill flash, signifying that Priority 1 Lock is enabled. A subsequent pressof the [4] key will disable Priority 1 Lock.option 1-1: battery saver Inhibit1 -- 12345PRG When function 1 is enabled (flashing) thebattery saver is turned off. The battery savershould be turned off only for getting propervoltage readings during service or forsystems requiring fast squelch attack time.NOTE: BK Radio current drain and battery life specifications are basedon performance with the battery saver on.