RELM GPH Programming Instruction Manual

Also see for GPH-CMD: OPERATION AND PROGRAMMING

Contents

RELM GPH Programming Instruction Manual Manual pdf 12 page image

8 BK Radio Programming Manualoption 1-2: group scan list1 -- 12345PRG When function 2 is enabled (flashing) thecurrent group will be scanned when theradio is operating in Group Scan Mode.option 1-3: transmit on Priority 11 -- 12345PRG When function 3 is enabled (flashing)transmissions will occur on PR1, if PR1 isn’tprogrammed OFF, when operating in Singleor Dual Priority Scan Mode.option 1-4: Priority 1 lock1 -- 12345PRG When function 4 is enabled (flashing) the[PRI] key is locked out in the OperatingMode. The user will not be able to changethe designation of the Priority 1 Channel.When function 4 is disabled (steady) the user will be able to changethe channel that is designated as Priority 1 Channel. See “Dual PriorityScan” in the Owner’s Manual.option 1-5: scan list lock1 -- 12345PRG When function 5 is enabled (flashing), theuser will not be able to change the channelsin the Scan List. When disabled (steady),the user can enter or delete channels fromthe Scan List. See “Change the Scan List” in the Owner’s Manual.store group one settingsOnce each function 1-5 is set as desired, you can store the changes,discard the changes, or disable all 5 functions.Press the [CLR] key to disable all Group One functions (steady).Press the [ENT] key to store new Group One settings into memory andadvance to the next field.Press the [FCN] key to advance to the next field without savingchanges.