Radio Shack PRO-84 User Manual

Contents

Beyond the Basics30disappears. Then press E. You can also usethe 0-9 keys to select the bank. To continuesearching, press FUNC + SVC.If you entered a frequency that has already beenentered elsewhere, the scanner sounds an errortone and displays the channel that was duplicated.If you entered the frequency by mistake, press ./CLRthen enter the correct frequency. To enter thefrequency anyway, press E to accept.scanning the stored channelsTo begin scanning channels, press SCAN. Thescanner scans through all non-locked channels inthe activated banks. (See “locking out channels” onPage 48 and “turning channel-storage banks on andoff” on Page 48). The scanner stops when it finds atransmission. When the transmission ends, thescanner resumes scanning.Notes:• If you have not stored frequencies into anychannels, the scanner does not scan.• If the scanner picks up unwanted partial, or veryweak transmissions, turn SQUELCH clockwiseto decrease the scanner’s sensitivity to thesesignals. To listen to a weak or distant station,turn SQUELCH counterclockwise.F