Beyond the Basics40(indicating the search direction) appear. Thesearch bank number being searched flashes.Press 0-9 to enable or disable the search banknumber being searched in this mode. Enabled banknumbers appear. Disabled bank numbers disappear.At least one search bank must be enabled. Thescanner sounds an error tone if you try to disable allthe search banks. The search bank and thefrequency where chain search starts depends onhow the scanner was set before you selected chainsearch mode.chain search hold modeTo start chain search hold mode, press HOLD inchain search mode. The scanner stops searchingand HOLD appears. In this mode, pressingFUNC + changes the search directiondownward and pressing FUNC + changes thesearch direction upward. or appearsaccording to the current search direction.Pressing while appears decreases thefrequency by one step and pressing increases itby one step.Hold down or to quickly decrease or increasethe frequency.F