Radio Shack PRO-84 User Manual

Contents

Beyond the Basics42program band select modeYou can use this mode to define the search rangeused during a chain search in each search bank.To set the scanner to program band select mode,press FUNC + B.SLCT. SRCH appears. Then select asearch bank.When you select the search bank, the lower limitand upper limit frequency assigned in the searchbank alternate on the display.To select another search bank, press FUNC +B.SLCT or FUNC + to increase the search banknumber or FUNC + to decrease it. Hold downFUNC + or FUNC + for about 1 second toquickly move through the search bank numbers.After choosing the search bank, follow these stepsto set the lower limit and upper limit frequency.X Enter the lower limit frequency by using the 0-9and ./CLR keys.Y Press E to select the lower limit frequency.Z Enter the upper limit frequency by using the 0-9and ./CLR keys.[ Press E to select the upper limit frequency.