Rangemaster Kitchener 110 Gas User's Manual & Installation Instructions
Also see for Kitchener 110: User's guide & installation instructionsUsers guide & installation
                                            | |
Contents
|
16ArtNo.302-0002 - 6BC annotatedArtNo.302-0002 - 6BC annotatedArtNo.302-0002 - 6BC annotated ArtNo.302-0002 - 6BC annotatedArtNo.302-0002 - 6BC annotated ArtNo.302-0002 - 6BC annotatedArtNo.302-0002 - 6BC annotatedthen press any button to stop the beep. Press [] to return tomanual cooking.Setting a Cook End TimePress and hold the ‘stop time’ [] button (Fig. 3.23) and thenpress the [+] button (or [–] button) until the required ‘stoptime’ shows (Fig. 3.24). The [] symbol and [AUTO] will showin the display.Once the ‘stop time’ is reached, the beeper sounds and the[AUTO] symbol flashes. Turn the oven control knob to 0 andthen press any button to stop the beep. Press [] to return tomanual cooking.To Start and Stop the Ovens AutomaticallyBefore you set the clock for automatic operation you musthave two numbers clearly in mind – the ‘cook period’ and the‘stop time’.Note: You cannot set a start time directly – this is setautomatically by setting the ‘cook period’ and the ‘stop time’.Press and hold the [] button (Fig. 3.25) and then pressthe [+] button (or [–] button) until the required ‘cook period’shows (Fig. 3.26).Now press and hold the [] button (Fig. 3.27) and thenpress the [+] button (or [–] button) until the required ‘stoptime’ shows (Fig. 3.28). Release the buttons.[AUTO] will now show in the display (Fig. 3.29).Set the oven(s) to the required temperature. When cookingis finished [AUTO] will flash and the beeper will sound. Turnthe oven knob(s) to the OFF position first, and then press anybutton once to stop the beep; press the [] button to returnto manual cooking.If you are out, do not worry about the beeper going off, itstops after a while. When you return, turn the oven knob(s) to0 first, and then press [] to return to manual cooking.AUTO is Showing, You Want to Reset to Manual CookingTo return to manual cooking mode from an Automaticsetting, simultaneously press the [+] and [-] key, this will clearthe automatic program and return to manual mode.Please note that this action will also clear the [Minute Minder]setting.Beeper Tone Adjustment.The beeper tone can be adjusted to three different levels.Whilst in the time of day mode, press and hold the [-] buttonfor a period until the display shows the Tone Bars (Fig. 3.30).Release the [-] button and immediately press again, this willadjust the tone down by a bar. Continue the process until acomfortable, tone is reached.Please note, during a power reset the clock will remember thelast tone set.For an overview of the functions refer to Table 3.2.Fig. 3.23 Fig. 3.24Fig. 3.25 Fig. 3.26Fig. 3.27 Fig. 3.28Fig. 3.29Symbol Function Notes[] Sets the Minute Minder Used with the [+] and [-] buttons[] Sets the duration / cookperiod Used with the [+] and [-] buttons[] Sets the end / stop cooktime Used with the [+] and [-] buttons[ ] or[] & []Allows the time of day tobe set when ‘AUTO’ is notactiveUsed with the [+] and [-] buttons[ ] Resets the cookingcontrol to manual[ - ] Decreases time interval Holding this button downallows a quick set[ + ] Increases time interval Holding this button downallows a quick set[ + ] & [ - ] Clears all ‘AUTO’ andminute minder programsTable 3.2ArtNo.302-0002 - 6BC annotatedFig. 3.30 |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine