INSTALLATIONCheck the appliance is electrically safe and gas sound when you have finished.31ArtNo.350-0012 - Securing the plinthArtNo.350-0011 - Fitting the plinth 2 (Kitchener)Outer plinthOuter plinth fixing screwInner plinthArtNo.350-0010 - Fitting the plinth 1 (Kitchener)Final FittingFitting the 2-piece Plinth (Kitchener)Fit the inner plinth to the bottom front of the cooker usingthe 4 screws provided (Fig.7.15).Fit the outer plinth (2 screws, 1 each end) to the inner plinth.The height of the outer plinth can be adjusted by sliding it upor down via the slotted hole (Fig.7.16).Fitting the 1-piece Plinth (Professional +)Loosen the 3 screws along the front bottom edge of thecooker. Hook the central keyhole over the central screw. Twistand fit each end keyhole over their respective screws. Tightenthe fixing screws (Fig.7.17).Final ChecksHotplate CheckCheck each burner in turn (refer to the ‘Hotplate Burners’section at the front of the instructions).Grill CheckTurn on the grill and check that the grill heats up.Oven CheckSet the clock as described earlier in the instructions, and thenturn on the ovens. Check that the oven burners light and startto heat up.Note: The oven light bulb is not included in the guarantee.Turn off the ovens.Customer CareInstaller: Please complete your details in this Guide, informthe user how to operate the cooker and hand over theinstructions.Thank you.Fig.7.15Fig.7.16Fig.7.17