Rangemaster U102110-07 User Manual

Also see for Elan 110 Ceramic: User guide Installation and user guide User's guide & installation instructions

18Cleaning your cookerEssential informationBefore thorough cleaning isolate the electricitysupply. Remember to switch on the electricitysupply before use.Never use paint solvents, washing soda,caustic cleaners, biological powders,bleach, chlorine based bleach cleaners,coarse abrasives or salt. Don’t mixdifferent cleaning products - they mayreact together with hazardous results.Recommended cleaning materials areshown in the chart below.If you want to move your cooker for cleaning,see the section called ‘Moving your cooker’.All parts of the cooker can be cleaned with hotsoapy water - but take care that no surpluswater seeps into the appliance.For cleaning materials see the ‘Cleaning Table’at the end of this section.Hotplate burnersSome models have a separate trim ring, whichfits on the burner head.The burner heads and caps can be removed forcleaning. Make sure they are absolutely drybefore replacing.The central hotplateA cap, B head, C notch, D electrode, E baseWhen refitting the burner head, make sure thatthe notch lines up with the electrode or hole inthe base. Check that the burner head is leveland that the cap is fitted centrally on the burnerhead.The Wok burnersThe Wok burners are a little more complicatedbut it also can be taken apart for cleaning.Wok burnerA inner burner cap, B outer burner capC inner burner head D outer burner headE Wok burner baseWhen reassembling a Wok burner, turn over thelarge base ring and find the ‘D’ shaped area.