27ConversionAll models are supplied set for useon group H natural gas. A conversionkit for LP gas is included with theappliance. See the instructions thatare supplied with the conversion kit.After converting the appliance pleaseattach the Gas Conversion stickerover the appropriate area of the databadge, this will identify the gas typethe appliance is now set for.This appliance is designedfor domestic cooking only.Use for any other purposecould invalidate anywarranty or liability claim.You will need thefollowing equipment tocomplete the cookerinstallationsatisfactorilySTABILITY BRACKETIf the cooker is to be suppliedwith gas through a flexiblehose, a stability bracket orchain must be fitted.These are not supplied bywith the cooker but areavailable at most builders’merchants.GAS PRESSURE TESTERFLEXIBLE GAS HOSEMust be in accordance withthe relevant standards.MULTIMETER(for electrical checks)You will also need thefollowing tools:1. Electric drill2. Masonry drill bit(only required if fitting the cookeron a stone or concrete floor)3. Rawlplugs(only required if fitting the cookeron a stone or concrete floor)4. Steel tape measure5. Cross head screwdriver6. Flat head screwdriver7. 4mm & 3mm Allen keys8. Spirit level9. Pencil10. Adjustable spanner11. Screws for fittingstability bracketChecking the parts4 pan supportsGriddle plateGrill pan and trivetLevelling toolHandyrackMeat tin4 Main oven shelvesSplashback & PlinthConversion kit from Natural gas toLP gas