Chapter 6: User Management117Returning User Group Information via RADIUSWhen a RADIUS authentication attempt succeeds, the Dominion KX IIdetermines the permissions for a given user based on the permissions ofthe user's group.Your remote RADIUS server can provide these user group names byreturning an attribute, implemented as a RADIUS FILTER-ID. TheFILTER-ID should be formatted as follows: Raritan:G{GROUP_NAME}where GROUP_NAME is a string denoting the name of the group towhich the user belongs.Raritan:G{GROUP_NAME}:D{Dial Back Number}where GROUP_NAME is a string denoting the name of the group towhich the user belongs and Dial Back Number is the number associatedwith the user account that the Dominion KX II modem will use to dialback to the user account.RADIUS Communication Exchange SpecificationsThe Dominion KX II sends the following RADIUS attributes to yourRADIUS server:Attribute DataLog inAccess-Request (1)NAS-Port-Type (61) VIRTUAL (5) for network connections.NAS-IP-Address (4) The IP address for the Dominion KX II.User-Name (1) The user name entered at the login screen.Acct-Session-ID (44) Session ID for accounting.User-Password(2) The encrypted password.Accounting-Request(4)Acct-Status (40) Start(1) - Starts the accounting.NAS-Port-Type (61) VIRTUAL (5) for network connections.NAS-Port (5) Always 0.NAS-IP-Address (4) The IP address for the Dominion KX II.User-Name (1) The user name entered at the login screen.Acct-Session-ID (44) Session ID for accounting.
