Chapter 9: Security Management183Option DescriptionTimer Lockout Users are denied access to the system for thespecified amount of time after exceeding thespecified number of unsuccessful loginattempts. When selected, the following fieldsare enabled: Attempts - The number of unsuccessful loginattempts after which the user will be lockedout. The valid range is 1 - 10 and the defaultis 3 attempts. Lockout Time - The amount of time for whichthe user will be locked out. The valid range is1 - 1440 minutes and the default is 5minutes.Note: Users in the role of Administrator areexempt from the timer lockout settings.DeactivateUser-IDWhen selected, this option specifies that theuser will be locked out of the system after thenumber of failed login attempts specified in theFailed Attempts field: Failed Attempts - The number ofunsuccessful login attempts after which theuser's User-ID will be deactivated. This fieldis enabled when the Deactivate User-IDoption is selected. The valid range is 1 - 10.When a user-ID is deactivated after the specified number of failedattempts, the administrator must change the user password and activatethe user account by selecting the Active checkbox on the User page.Encryption & ShareUsing the Encryption & Share settings you can specify the type ofencryption used, PC and VM share modes, and the type of resetperformed when the Dominion KX II Reset button is pressed.WARNING: If you select an encryption mode that is not supported byyour browser, you will not be able to access the Dominion KX II fromyour browser.1. Choose one of the options from the Encryption Mode drop-down list.When an encryption mode is selected, a warning appears, statingthat if your browser does not support the selected mode, you will notbe able to connect to the Dominion KX II. The warning states "Whenthe Encryption Mode is specified please ensure that your browsersupports this encryption mode; otherwise you will not be able toconnect to the Dominion KX II."
