Chapter 3: Working with Target Servers49Logging OutTo quit the Dominion KX II Remote Console:• Click Logout in the upper right-hand corner of the page.Note: Logging out also closes any open Virtual KVM Client and serialclient sessions.Multi-Platform Client InterfaceRaritan Multi-Platform Client (MPC) is a graphical user interface for theRaritan product lines, providing remote access to target serversconnected to Raritan KVM over IP devices. For details on using MPC,see the KVM and Serial Access Client Guide available on Raritan'swebsite on the same page as the KX II User Guide. Instructions onlaunching MPC are provided there.Opening MPC from a Web BrowserImportant: Regardless of the browser you use, you must allowpop-ups from the Dominion device's IP address in order to openMPC.1. To open MPC from a client running any supported browser, typehttp://IP-ADDRESS/mpc into the address line, where IP-ADDRESS isthe IP address of your Raritan device. MPC will open in a newwindow.Note: The Alt+Tab command will toggle between windows only onthe local system.When MPC opens, the Raritan devices that were automaticallydetected and which are found on your subnet are displayed in theNavigator in tree format.2. If your device is not listed by name in the navigator, add it manually:a. Choose Connection > New Profile. The Add Connection windowopens.b. In the Add Connection window, type a device Description,specify a Connection Type, add the device IP address, and clickOK. These specifications can be edited later.3. In the Navigator panel on the left of the page, double-click the iconthat corresponds to your Raritan device to connect to it.
