Chapter 4: KX III Administrator Help195Setting Network ParametersNetwork parameters are configured using the interface command.admin > Config > Network > interface ipauto none ip192.168.151.12 mask 255.255.255.0 gw 192.168.151.1 modeautoWhen the command is accepted, the device automatically drops theconnection. You must reconnect to the device using the new IP addressand the user name and password you created in the resetting factorydefault password section.Important: If the password is forgotten, the KX III will need to be reset tothe factory default from the Reset button on the back of the KX III. Theinitial configuration tasks will need to be performed again if this is done.The KX III now has the basic configuration and can be accessedremotely via SSH, GUI, or locally using the local serial port. Theadministrator needs to configure the users and groups, services, security,and serial ports to which the serial targets are attached to the KX III.CLI PromptsThe Command Line Interface prompt indicates the current commandlevel. The root portion of the prompt is the login name. For a direct adminserial port connection with a terminal emulation application, Admin Portis the root portion of a command.admin >CLI Commands Enter admin > help.Command Descriptionconfig Change to config sub menu.diagnostics Change to diag sub menu.help Display overview of commands.history Display the current session's command line history.listports List accessible ports.logout Logout of the current CLI session.top Return to the root menu.
