Appendix F: Frequently Asked Questions367Question AnswerDo enterprise and SMB customers usesmart cards, too?Yes. However, the most aggressivedeployment of smart cards is in the U.S.federal government.Which CIMs supportsmart card/CAC?The D2CIM-DVUSB, D2CIM-DVUSB-DVI,D2CIM-DVUSB-HDMI andD2CIM-DVUSB-DP are the required CIMs.Which smart card readers aresupported?The required reader standards are USBCCID and PC/SC. Consult the userdocumentation for a list of certified readersand more information.Can smart card/CAC authenticationwork on the local port and viaCommandCenter?Yes. Smart card/CAC authentication workson both the local port and viaCommandCenter. For the local port,connect a compatible smart card reader tothe USB port of the Dominion KX III.ManageabilityQuestion AnswerCan Dominion KX III be remotelymanaged and configured via Webbrowser?Yes. Dominion KX III can be completelyconfigured remotely via Web browser. Notethat this does require that the workstation havean appropriate Java Runtime Environment(JRE) version installed. Besides the initialsetting of Dominion KX III’s IP address,everything about the solution can becompletely set up over the network. (In fact,using a crossover Ethernet cable andDominion KX III’s default IP address, you caneven configure the initial settings via Webbrowser.)Can I back up and restoreDominion KX III’s configuration?Yes. Dominion KX III’s device and userconfigurations can be completely backed up forlater restoration in the event of a catastrophe.Dominion KX III’s backup and restorefunctionality can be used remotely over thenetwork, or through your Web browser.
